PPH-1503 User Manual
140
7 Power On
128
This bit is set if the power supply
has been reset from the last time
you read the event register.
The following will clear the standard event register:
•
The *CLS command is executed.
•The *ERR? query is used read the event register.
The following will clear the standard event enable register.
•*ESE 0 is written to the standard event enable register.
Status Byte Register Commands
Command
*SRE <Allowed values>
Function
Service request enable register (SRER) command
that writes a binary weighed value which
determines which events in the status byte register
are enabled.
Function
Allowed
values
Decimal vales: 0
～
255
Example
*SRE 7
0000 0111
Returns the SRER setting (0000 0111)
Command
*SRE?
Function
Queries the status byte enable register. This
command returns a binary-weighted decimal
number that indicates which bits are set in the
status byte register. The range is from 0~255.
Example
*SRE?
0000 0111
Returns “7”, which are the contents of the service
request enable register.
北京海洋兴业科技股份有限公司（证券代码：839145） 电话：010-62176775 网址：www.hyxyyq.com
