PPH-1503 User Manual
34
RelayControl
Relay control mode has 2 settings:
Zero, One.
Zero: Sets the relay OUT port of the
rear panel control interface to low
(external relay energized).
One: Opposite of the zero setting.
The initial state of the relay is set by
the user. And the actual state will
only change when relay control
signal changes state. See page
further details.
O.V.P
The overvoltage settings have a
setting range of 1.00 to 15.20V or
OFF.
RecallSetup
There are 6 sets of save/recall
memories.
Rst/ SAV0 to SAV4
Output Range
Rated Voltage
0.000V~15.000V
Rated Current
0.0000A~3.0000A (0V~15V)
0.0000A~5.0000A (0V~9V)
Parameter
Settings
Voltage
Press the
Voltage
key
and the voltage setting
on the LCD is
activated. A yellow dot
appears under the
current digit.
V-Set
00.500 V
北京海洋兴业科技股份有限公司（证券代码：839145） 电话：010-62176775 网址：www.hyxyyq.com
