GVS KI/U 0401.1 User Manual Download Page 50 | Manualshive

Page: 50 / 53

GVS KI/U 0401.1 User Manual Download Page 50

K-BUS

®

KNX/EIB

Universal Interfaces

47

6

CH X level increment/
decrement

level increment/
decrement, X

1bit

C,W

1.007 step

The communication object “level increment/decrement, X” is used to increase/decrease the level of the switch. It will

increase one level when sending “1” and decrease a level when sending “0”. The detail process will be describe in the
switching sequence parameter chapter.

Form 5 Communication object “Switching sequence”

6.6. Communication object “Counter”

The communication object “Counter” will be shown in Fig.6.6. Including standard counter and

differential counter communication object, both these communication objects are initiated counter by one
operation and the counter range are the same, but the counting are independent of each other.

Fig.6.6 Communication object “Counter”

No.

Function

Object name

Data type

Flags

DPT

1

CH X Counter value

Output counter value

1byte, X

（

1byte/2byte/4byte

）

1byte
2byte
4byte

C,W,T

5.010 counter pulses(0..255)
8.001 pulses difference
7.001 pulses
13.001 counter pulses(signed)

This communication object is used to transmit the current counting value of the standard counter, and it can modify the

counting value simultaneously. Different data type makes the different counting range, it is defines by parameter “Date
width of counter”.

2

CH X Differential

Counter

Differential Counter

1byte, X

（

1byte/2byte/4byte

）

1byte
2byte
4byte

C,W,T

5.010 counter pulses(0..255)
8.001 pulses difference
7.001 pulses
13.001 counter pulses(signed)

It is visible if enable the parameter “Enable differential counter”. This communication object is used to transmit the

current counting value of the differential counter, and it can modify the counting value simultaneously. Different data type
makes the different counting range, it is defines by parameter “Date width of counter”.

3

CH X Request
Counter value

Request

Counter value, X

1Bit

C,W

1.003 enable

This communication object is used to ask for the current counting value of the standard counter and the differential

counter. The communication object “CH X Counter value” and “CH X Differential Counter” will transmit the current counting
value if receive a logic value “1”, it will no reaction if receive a logic value “0” telegram.

«
...
48
49
50
51
52
...
»

Summary of Contents for KI/U 0401.1






















































Reviews:

No comments