K-BUS
○
R
KNX/EIB
Switch Blind Actuator
13
www.video-star.com.cn
Tel.
：（
8620
）
39338986
Fax
：（
8620
）
39338465
Fig. 4.2 Parameter Window“Channel function”
When the channel is enabled, the corresponding parameters can be set.
4.3 Switch outputs (A~L)
There are max. 24 outputs. Each output can be set separately, and parameters and objects which are assigned to
each output are the same. Using output A1 as an example described.
4.3.1
Parameter window
“Channel X
1,2
”
Parameter window “Channel X
1,2
” can be shown in fig.4.3. which applies to a whole output. In addition to
setting general switching function, but also set position of switch on the bus power on and power down , reports of
switch status, etc..