7
6
Press the
botton in the heat preservation state, and the nixie tube and
light will flash 3 times at the same time. After no key is pressed,
the indicator
light is always on and
the indicator light is off. When the water temperature
is lower than the gear temperature, the kettle will automatically heat up, and
the kettle will stop heating when the water temperature reaches the set holding
temperature. The buzzer beeps 6 times,
the indicator light is always on,
and the indicator light is off, and the kettle enters the heat preservation state.
When the water temperature is higher than the gear temperature, the kettle does
not heat,
the indicator light is always on,
the indicator light is off, and the
buzzer beeps 6 times, and the kettle enters the heat preservation state.
STOP WORKING
1
After pressing the
botton to the heat preservation position in the standby
state, the nixie tube and
indicator light flash. Press the
button twice again,
the indicator light is off,
the indicator light is off, the kettle stops heating,
and the digital tube displays the water temperature and enters the standby state.
2
When the
botton is pressed to the heat preservation position in the standby
state, the nixie tube and
indicator light flash. Press the
button again, the
digital tube and
the indicator light,
after the indicator flashes 3 times,
the indicator light is off,
the indicator is always on, the kettle is heating, and
the digital tube displays the water temperature in real time. After pressing the
button again during the heating process,
the indicator light is off,
the
indicator light is off, and the kettle stops heating and enters the standby state.
3
Press the
botton in the standby state. The digital tube displays the current
water temperature,
the indicator light is off,
the indicator is always on, and
the kettle is heating. After pressing the
botton again during this process,
the indicator light is off,
the indicator light is off, and the kettle stops heating
and enters the standby state.
4
In the heat preservation state, press the
button twice continuously,
the
indicator light will go out,
the indicator light will go out, the kettle will stop
heating, and the digital tube will display the water temperature and enter the
standby state.