5
3
botton
Touch the
botton in the standby state, the digital tube displays the current
water temperature, the indicator light is off,
the indicator is always on, and
the kettle is heating.
WORKING STATUS
Display
1
In the state of boiling water, the digital tube displays the current water
temperature,
the indicator light is off,
and the indicator is always on.
2
In the heat preservation state, the digital tube displays the current water
temperature,
the indicator light is always on,
and the indicator light is off.
3
In standby mode, the digital tube displays the current water temperature,
the
indicator light is off,
and the indicator light is off.
(The digital tube displays the water temperature in real time,
the indicator
shows the state of boiling water,
and the indicator shows the state of heat
preservation)
Set up
1
In the standby state, press the botton to the heat preservation position.
The
nixie tube and the
light flash 3 times at the same time.
The indicator light
is always on and
the indicator light is off.When the water temperature is lower
than the gear temperature, the kettle will automatically heat up, and the kettle will
stop heating when the water temperature reaches the set holding temperature.
The buzzer beeps 6 times,
the indicator light is always on,
and the
indicator light is off, and the kettle enters the heat preservation state. When the
water temperature is higher than the gear temperature, the kettle does not heat,
the indicator light is always on,
the indicator light is off, and the buzzer
beeps 6 times, and the kettle enters the heat preservation state.