4
BUTTON DESCRIPTION
1
Boil/Cancel button
2
Temperature adjustment button (European version:
70°C/80°C/85°C/90°C/95°C/100°C) 100°C heat preservation level, the actual
heat preservation temperature is 95°C. The other insulation files are the actual
temperature.
SET STATUS
1
power ups
Install water and connect to the power source. The nixie tube and the two indicator
lights are always on for 1 second, the buzzer beeps once, and the nixie tube
displays the current water temperature. After that,
and
are off, and the
kettle does not heat and enters the standby state
(The digital tube displays the current water temperature)
2
button
Touch the
botton to set the heat preservation position in the standby state.
The gear starts at 70°C, and the buzzer will beep once every time you press the
botton. The nixie tube displays the corresponding heat-preservation gear and
flashes with the light at the same time. The heat preservation setting cycles from
„70°C“ to „100°C“ in turn.
For example: in the standby state, set the heat preservation position and press the
botton once, and the nixie tube displays „80“ to indicate heat preservation
(80°C).
(The digital tube displays the heat preservation position,
and the indicator
light shows the heat preservation status)