CMG-DCM
Port 2, Key 7002, name Port A, device /dev/ttySA2, baud 19200
Each port will be listed, with its number (e.g.
0
), name (e.g.
Data out
port
), and device (e.g.
/dev/ttySA0
).
Configuring digitizers
You can configure digitizers directly using the above commands. However, the
DCM also provides a Web interface to the digitizer's configuration options.
1. Choose the entry for the relevant port under Actions
Digitizer Setup
→
on the menu tree.
2. You can change all of the digitizer's configuration options from this
page. If you have attached a 6-channel digitizer, the page will reflect
this:
30
Issue A
