CMG-DCM
Retrieving data from a DCM's disk can be done by plugging it into a
computer compatible with the USB or FireWire mass storage standards.
Disks can be swapped at any time with no risk to data.
•
A stand-alone DCM can also be supplied in a form factor suitable for
mounting in a standard 19” rack. Such a DCM will normally come
equipped with eight additional serial ports TTS0-7, and an optional State
of Health (SOH) interface for monitoring or tamper evidencing.
Up to four modules may be mounted side-by-side in a 19” rack.
•
An integrated or modular DCM may be combined with a digitizer and
seismometer to produce a single unit capable of measuring seismic data,
storing, and passing it on over a network:
6
Issue A
