Configuring dynamic ports
G&D ControlCenter-Compact ·
13
English
Configuring dynamic ports
The different device variants of the
ControlCenter-Compact
series provide up to 80
dynamic ports
for the connection of user modules and target modules.
Automatic port mode
By default, the matrix switch detects the user modules (
CON
) or target modules (
CPU
)
connected to the ports and auto-configures the ports.
Special features for cascading a matrix switch
By cascading a matrix switch, you can increase the number of connectable target
computers. For this, connect further matrix switches to the configured ports:
Connect master matrix switches to
up ports
.
Connect slave matrix switches to
down ports
.
By deault, the ports of the different variants of the
ControlCenter-Compact
series are
configured to connect both master and slave matrix switches:
IMPORTANT:
The manual of the web application
Config Panel
provides detailed
information about the configuration of
dynamic ports
.
NOTE:
The number of ports depends on
ControlCenter-Compact
variant.
the following paragraphs describe the configuration of the 32 ports of a
Control-
Center-Compact-32C
.
IMPORTANT:
Mind or change the port mode of a cascade.
10
12
14
16
15
13
11
9
2
4
6
8
7
5
3
1
18
20
22
24
17
19
21
23
26
28
30
32
31
29
27
25
Dynamic Ports