Installation
4
· G&D ControlCenter-Compact
Installation
The following pages describe the installation of the devices of the KVM system.
Power supply
Main Power:
Plug one of the supplied power cable in this interface. Connect the
power cable with a power outlet and turn the power button on.
Red. Power:
If required, plug one of the supplied power cable in this interface to
establish a redundant power supply. Connect the power cable with a power outlet of
another
power circuit and turn the power button on.
NOTE:
The following drawings refer to the
ControlCenter-Compact-32C
. The different
variants vary in the number of dynamic ports to connect user modules and target
modules.
NOTE:
When choosing a place for the device, please ensure to comply with the
ambient temperature limit (see
Technical data
on page 27) close to the device. The
ambient temperature limit must not be influenced by other devices.
18
20
22
24
17
19
21
23
26
28
30
32
31
29
27
25
Power
Red.
Main
Bus Out
Bus In
Status
Ident.
Fail
Portfunction
Main Power
Red. Power
