Initial configuration of network settings
G&D ControlCenter-Compact ·
9
English
Initial configuration of network settings
Accessing the
Config Panel
web application and using the expanded network functions
requires you to configure the network settings of the matrix switch.
You can configure the network settings by using one of the new consoles.
Configuring network ports
A central module, which is integrated into the network, can only be addressed after
the network ports are configured.
How to configure the settings of a network port:
1. After the console is switched on, the matrix switch asks you to log in. Enter the
following data to the login box:
2. Press
Enter
to login and open the on-screen display.
3. Press
F11
to call the
Configuration
menu.
4. Select the
Network
entry and press
Enter
.
5. Select the
Settings
entry and press
Enter
.
6. Enter the following data in the
Interface A
(interface
Network A
) or
Interface B
(inter-
face
Network B
) section:
NOTE:
In the defaults, the following settings are pre-selected:
IP address of
network interface A
:
192.168.0.1
IP address of
network interface B
: address obtained using
DHCP
global network settings: settings obtained using
DHCP
ADVICE:
Use the
information
menu to retrieve the IP addresses of the network inter-
faces A and B.
After opening the on-screen display, press
F12
, select the line
Hardware information
.
and press
Enter
.
Username:
Enter the default username
Admin.
Password:
Enter the default password
4658
.
