Installation
G&D ControlCenter-Compact ·
7
English
Network interfaces
Network A:
If required, plug in a category 5e (or better) twisted-pair cable, which is
available as accessory.
Connect the other end of the cable to a network interface of the local network.
Network B:
If required, plug in a category 5e (or better) twisted-pair cable, which is
available as accessory.
Connect the other end of the cable to a network interface of the local network.
NOTE:
You need to connect the central module to one or two local networks to
configure the central module via
Config Panel
web application and use the
enhanced network functionalities (for example authentication against directory
services, time sync via NTP server, netfilter or syslog).
IMPORTANT:
If you change the configuration of the
Dynamic Ports
in the web appli-
cation, or if you enable the signalling of the
Dynamic Ports
modes, end the connec-
tion to the web application and remove the twisted-pair cable from the network port
at the central module.
Network A
Network B
10
12
14
16
15
13
11
9
2
4
6
8
7
5
3
1
18
20
22
24
17
19
21
23
26
28
29
27
25
Dynamic Ports
