©
Guldmann
G
B
/U
S
-1
19
7/
03
/0
7
•
#
94
41
26
©
Guldmann
G
B
/U
S
-1
19
7/
03
/0
7
•
#
94
41
26
5
©
Guldmann
G
B
/U
S
-1
19
7/
03
/0
7
•
#
94
41
26
1.05
Safety rules
When working beneath the platform, there is a risk of becoming trapped
between the moving parts of the platform. The following safety rules must
therefore be observed:
1. The safety chain/strap must always be used while working beneath the
platform.
2. The lifting platform must NOT be raised/lowered while work is going on
beneath the lifting platform. This applies even if the safety equipment is
assembled.
3. When the lifting platform is assemb-
led and connected so that it can be
raised/lowered, only one person may
work on it.
Safety equipment
When working beneath the platform,
the safety chain/-strap MUST be
used.
The safety chain/strap is fitted
between the safety eyelets on the
scissors or the two central tubes
of the scissors as illustrated in the
picture.
When the chain/strap has been fitted,
lower the platform until the chain is taut,
i.e. until the traction wheel ”releases” the curve.
1.06
Assembly
The LP5 & LP5+ must be assembled by the Guldmann Service Team or an
engineer approved by Guldmann. The assembly must follow the assembly
instructions. The assembly instructions must be delivered to the engineer by
the producer or the distributor.
NB
The platform must not be activated before the ramp, etc. has been
assembled.
The LP5 & LP5+ are supplied with the safety edge, safety curtain, etc.
assembled. Railing, ramp and end covers must be assembled before use.
