©
Guldmann
G
B
/U
S
-1
19
7/
03
/0
7
•
#
94
41
26
©
Guldmann
G
B
/U
S
-1
19
7/
03
/0
7
•
#
94
41
26
13
©
Guldmann
G
B
/U
S
-1
19
7/
03
/0
7
•
#
94
41
26
Fitting of safety curtain
1. The surfaces of the safety curtain are pre-fitted with the Velcro side of Vel
-
cro tape.
2. Place a broomstick or similar through the scissors on the narrow side of
the lifting platform.
3. Put the safety curtain over the upper plate and place it on the broomstick,
freely suspended.
4. Lift and fit the safety curtain, starting with the corners away from the
access ramp; press the Velcro firmly to the upper plate of the lifting platform.
5. Lift and fit the safety curtain, pressing it firmly to the Velcro in the opposite
corners on the upper plate of the lifting platform.
6. Remove the broomstick.
7. Position the safety curtain so that it follows the edge of the bottom plate
on the lifting platform.
Safety cut-out function
If anyone or anything gets caught
beneath the platform when it is
lowered, the descent will stop as
soon as the safety cut-out function
is activated.
Reset the safety function by pressing
the »
é
« button and removing the
object that activated the safety
cut-out function.
2.04
Accessories
Extra control panel
Extra control panels with function buttons »
é
« »
« for
mounting on walls and similar. The control panel is available
with a lock.
Remote control, infrared
Use this when there are one or more independent users.
This allows users to control the lifting platform without being
dependent on a helper.
Important!
If the user is independent, the remote control must be
fastened to him/her in such a way that it is always within
the user’s reach.
