10
©
Guldmann
G
B
/U
S
-1
19
7/
03
/0
7
•
#
94
41
26
©
Guldmann
G
B
/U
S
-1
19
7/
03
/0
7
•
#
94
41
26
©
Guldmann
G
B
/U
S
-1
19
7/
03
/0
7
•
#
94
41
26
1
3
2
LP5+
LP5
2.02
The hand control
The lifting platform is operated using an hand control.
The lifting platform is logical and unproblematic to operate and use, even with
no prior knowledge.
1. Raise
2. Lower
3. Emergency stop
To raise the lifting platform from its lowest level
1. When the lifting platform is at the lowest level and the access ramp has
been lowered to the proper level, wheelchair users can freely drive up on to
the
lifting platform.
2. Activate the control panel by pressing (1) to raise the access ramp; this
then functions as a guard against rolling off. Button (1) is active for as long as
it is held down.
3. When the access ramp has been raised to its highest level and (1) is still
being pressed, this will raise the platform.
4. When the lifting platform is level with the landing, the platform stops auto
-
matically and the user can drive onto the landing.
5. When using the safety gate, it is manually opened. It is electronically secured
and cannot be opened until the lifting platform is in the highest position.
6. If the lifting platform is installed outdoors with a safety gate, the lifting platform
may not be left in the highest position, as the unlocked gate will be able to
rattle in windy weather. The platform must therefore be lowered a bit after use