Guldmann GH3 Twin Manual Download Page 44

Page: 44 / 64

Guldmann

GB/US

-02/2021 • # 550216_19

Guldmann GB/US

-02/2021 • # 550216_19

Emergency lowering function, electric

If the GH3 fails, the electrical emergency lowering function is used to lower

the user safely. The emergency lowering function is operated by a constant

pull on the red strap that is used for the emergency stop.

When releasing the red strap, the emergency lowering function will be

replaced by the emergency stop.

Emergency lowering function,

mechanical

If the electrical emergency lowering

function in the GH3 fails, the emergency

lowering can be done mechanically.

Remove the side covers.

Release the side covers from the top of

the hoist by means of a gentle push on

the fixing points on each side. The covers

are tipped free of the hoist and can be

removed.

Then release the hoist’s motor by turning

the handle bearing the words

“EMERGENCY DOWN”. This handle is

located immediately behind the side cover

and must be turned clockwise.

Note:

For hoists with a recommended load of

more than 275 kg (600 lbs), there are

two motors and therefore two handles to

activate, one on each side.

Summary of Contents for GH3 Twin

































































Search results

Summary of Contents for GH3 Twin

Reviews:

Brands by name

Popular brands

Guldmann GH3 Twin, Manual

Search results

Summary of Contents for GH3 Twin

Reviews:

Brands by name

Popular brands