Guldmann GH3 Twin Page 34 Manual Download

Page: 34 / 64

Guldmann

GB/US

-02/2021 • # 550216_19

Guldmann GB/US

-02/2021 • # 550216_19

2.09

Calibration/verification of Classe III Scale

In order to maintain the medical approval the digital scale must be calibrated/

verified according to national regulatory requirements at an accredited testing

institute.

Software version and change counter are verified on the hand control’s dis

play.

In daily use it can be verified that the system is approved for medical use by

a Notified Body by confirming that ”Software version counter” reads 1 and the

”Event counter” on the display corresponds with the counter values on the

verification label.

Both values are 1 from the factory and until the first re-verifications.

Menu

Scale Info 1-2

Version

01.00

Next

Scale Info 2-2

Changes

001

Next

Exit

1. Press any key on the hand control to activate the display.

2. Select “Menu” using the function key located immediately below the display.

3. Next, select

until the ”Version” menu appears in the display.

Version (information screen 1 of 2 in scale menu):

• The number before the decimal counts the software versions and larger

modifications;

• The number after the decimal counts minor software modifications and bug

fixes.

4. Select ”next” to read ”Changes”.

Changes (information screen 2 of 2 in scale menu): change counter

• Counts changes in software parameters such as calibration and values for

G factor.

5. Press EXIT to get back to the main menu.

Summary of Contents for GH3 Twin

































































Search results

Summary of Contents for GH3 Twin

Reviews:

Related manuals for GH3 Twin

Brands by name

Popular brands

Guldmann GH3 Twin, Manual

Search results

Summary of Contents for GH3 Twin

Reviews:

Related manuals for GH3 Twin

Brands by name

Popular brands