Guldmann GH3 Twin Page 45 Manual Download

Page: 45 / 64

Guldmann

GB/US

-02/2021 • # 550216_19

Guldmann GB/US

-02/2021 • # 550216_19

3. When the brake(s) has/have been

released, the user will be lowered slowly.

If the total weight of the user and the lifting

accessories is low (e.g. less than 50 kg

(110 lbs), it may be necessary to help the

user down by turning the large belt wheel

located on the opposite side of the handle

and in the direction of arrow marked on

the belt wheel.

Note:

A GH3 with a recommended load of more than 275 kg (600 lbs) has two lif

ting motors, and therefore two belt wheels to activate, one on each side.

In case of a critical mechanical failure, the hoist contains a mechanical

protective system that stops the strap reel.

Warning!

After the mechanical protective system has been activated in the GH3, the hoist

MUST be serviced by a qualified technician or by the Guldmann Service Team.

2 .14 Charging/connection

The GH3 is automatically charged trough charging liners in the rails. This

guarantees the hoists functionality and maintains the batteries to ensure a

long lifetime.

The indicator lamp on the bottom of the hoist turns yellow if the charge status

becomes low or if there is a complete interruption of the charging function. The

GH3 then has a limited number of lifts available before it must be re-charged.

The transformer must be connected and switched on before charging can

take place. A green indicator lamp on the transformer indicates that it is

connected and switched on.

2 .15 Accessories

Guldmann – ABC slings and lifting hangers

Obtain a brochure from your distributor, manufacturer or at

www.guldmann.com

Extension strap

The extension strap is used where the distance between the lower part of the

rails and the floor exceeds 3.5 m (11' 7"). The extension strap is available as

an accessory.

Switch track, electrical

A switch track can be used in rail

systems where it is used to change

direction.

Summary of Contents for GH3 Twin

































































Search results

Summary of Contents for GH3 Twin

Reviews:

Related manuals for GH3 Twin

Brands by name

Popular brands

Guldmann GH3 Twin, Manual

Search results

Summary of Contents for GH3 Twin

Reviews:

Related manuals for GH3 Twin

Brands by name

Popular brands