16
the filter in time, and check the cleanliness of the air compressor
and the environment where it is located. If there is no impurity, it is
recommended to replace the filter every 24 months. Spare filters are
included in accessories. The way to replace filter are shown in Figure 8.
Fig. 8 Schematic diagram of filter replacement
5.2 Storage
5.2.1 This device should be carefully placed away from the source,
and should be installed or stored in a cool, dry and ventilated place.
5.2.2 Do not mix with toxic, corrosive, flammable and explosive
articles during storage.
5.2.3 The product should be stored in an environment where the
relative humidity is 10% ~ 93%, the atmospheric pressure is 70kPa ~
106kPa, and the temperature is -20°C ~ + 55°C.
5.2.4 When this device is not in use for a long time, it should be
powered on and ventilated once a month, at least five minutes each
time.
5.3 Transportation
5.3.1 Excessive impact and shake should be prevented during
transport. Lay it carefully and lightly.
5.3.2 Do not put it together with dangerous goods during transport.
5.3.3 Avoid being exposed to sun, rain, and snow during transport.
Summary of Contents for AP-A
Page 1: ......
Page 26: ...ZMN SM 490 V1 0 20220222 ...
