52
System Menu (screen 2)
Rotate the Navigator and select the
Wi-Fi ON/OFF
option to activate the
Wi-Fi.
When ON the WiFi Symbol should
be seen in the upper right corner
Note: WiFi initialisation can take up to 60 seconds to complete, please be patient
Incorporated into the WiFi system is an in-built data storage module in the antenna, this
enables data to be stored independently whilst taking measurements to enable a more
secure mode of data collection. Data transmission can be interrupted when utilising WiFi
and the in-built storage guarantees that data continue to be safely collected during the WiFi
drop out. The in-built memory module can also be utilised whilst taking measurements with
the data cable connected. This function is automatically activated when the Wi-i option is
switched on.
Wire WiFi Channel Selection
This option allows you to choose an alternative WiFi channel; this may be necessary if the
signal is poor during WiFi measurement. The wireless communication maybe affected if
many devices share the same channel with the GX HDR GPR. Choosing the best WiFi
channel on your GX helps to reduce interference and improve your WiFi signal. The best
option would be to use a WiFi analyzer app on your smart phone to ascertain the local WiFi
channels that are most congested. Choose and install a free app from the App Store or
Google Play and launch it. Use the overview option to see the wireless networks in your area
