28
Wheels Edit Options
Select Wheel Name to create a name for the new wheel.
Select Forward or Reverse depending on the direction of
the wheel during the calibration process.
Measure a distance on the ground using a measuring wheel
or tape. Enter this distance after selecting Distance for
Calibration.
Tip:
For a higher level of accuracy, measure a length over
the surface where the GPR is being used. A longer distance
will average out any surface variations.
Select Start Calibration once the correct details are entered
into the above options and when the GPR is positioned over
the beginning of the measured length. Move the GPR
towards the end of the measured length, when this process
is complete, select Stop Calibration
