22
Zoom Function
Use the Navigator
to select the Vertical scrollbar. The vertical scrollbar turns yellow when
selected. Push the Navigator
once to activate scrolling. The Vertical scrollbar
will turn blue
indicating that it has been activated. Push, hold and turn the Navigator
to zoom in and out, the
vertical scroll bar will be blue with arrows.
Main Menu Icons
Quit and shutdown the system after completing the radar measurements
Note: If the QUIT option is executed but the Controller is not turned off immediately, the unit has
to be put through a power cycling sequence before it can be restarted. This is achieved by
pressing the power switch on the Controller and then waiting for 5-10 seconds before pressing
the power switch again. If this procedure is not followed, the unit will fail to turn on.
Select the New button to start scanning. The GPR data will begin to
appear on the black screen as the unit is moved forward.
Select the Continue button to resume the last stopped measurement.
Press the Measurement Parameters button to access the
measurement parameters menu. See the
Measurement Parameters
section for more information on the use of this option.
The Full screen button toggles the display to full-screen mode where the
menu and status information are hidden and the entire display is used to
display the GPR profile
