User Manual
60
change.
•
To change the size of an area after selecting it, click at one of its four corners with the
touch pen, drag the corner to a desired position and then release it. Or firstly press button
A for an instant, move the joystick up, down, left or right to desired positions and then
release it.
•
Areas can be set to display the Maximum, Average or Minimum temperature. This is done
by setting the value of sub-option AreaFunc in option Analysis under submenu Parameter
and then choosing button OK to confirm the setup.
•
It is possible to change the area number from 1 to 10. This is done by setting the value of
sub-option AreaNum in option Analysis under submenu Parameter and then choosing
button OK to confirm the setup. After this, a corresponding number of areas will be
available in the area analysis.
•
Press button C to exit and return to the live or frozen or save image.
Isotherm Analysis
•
Isotherm Analysis can be performed on live or zoomed or frozen or saved images.
