User Manual
28
Button F3: Laser locater/ Histogram control
When option Laser in sub-menu Function of menu Parameter is set as On, press button F3 in
live/zoomed thermal image to turn on the laser locater and press it again to turn off the laser
locater.
When option Histogram in sub-menu Function of menu Parameter is set as On, press button
F3 in frozen or saved thermal image to display or close histogram.
Button F4: Auto focusing control
When there is no menu or dialog box in live/zoomed thermal image, keep button F4
depressed till a frame appears in the image, aim the frame at the target to be focused and
then release button F4, then the camera will automatically focus till getting a clear image of
the target.
Quick Start Guide
•
Ensure that the battery is fully charged and the SD memory card is inserted in the camera
•
Insert the VGA LCD screen into the mounting foot and ensure it has locked into place.
•
Keep button On/ Off depressed for 2 seconds to switch on the camera.
•
Wait till the boot screen image disappears and uncover lens cap. Non Uniformity
Calibration (NUC) is performed automatically.
•
Aim the camera at the target.
•
Press button F4 to automatically focus or move the joystick up or down to manually focus.
•
Move the dioptre adjuster to get a clear image in the viewfinder.
•
Press button A for 2 seconds to switch between Auto1, Auto2 and Manual modes.
•
Press button A and release it instantly and then adjust Tmax, palette, Tmin and filter if
necessary.