Charging Responders
54
The rechargeable responder should be fully charged before use.
A full charge takes approximately 24 hours.
!
DO NOT charge responders in an explosive
atmosphere or other hazardous environment.
The responder should be switched off while charging.
To Charge the Responder:
!
Note: Only use the supplied charger. Only charge at ambient temperatures of 0°C to
+45°C.
1. Switch the responder off and unscrew the charging socket cap on the rear of the unit.
2. Connect the supplied mains charger (Part No. 39-0049-2).
(Input:
100–240VAC, 50–60Hz, 1.5A
Output:
24VDC, 2.5A, 60W
).
3. When charging is complete, disconnect the power from
the unit and replace the charging socket cap.
Rechargeable Responder—Rear
Charging
Socket
Summary of Contents for RadaScan View
Page 69: ......
