l
11
Sensor Information Display
The Sensor Information Display shows the status of the sensor and its internal system throughout each period of operation.
Sensor Information Display Details
Below is a list of the messages that appear during normal startup and operation of the CyScan Sensor. The messages are
listed in the order they normally occur, when the system is left to startup and run without the user pressing any buttons.
Display Screen Message
Description
CTRL BOOT Wtg cmd..
V1.5.0.0
Displays the current version of the boot loader (1.5.0.0 in this example).
Starting application
The application is starting.
Starting receiver...
The receiver is starting.
Running 10:35
Temp 25°C
The sensor and all its internal systems are now running or suspended etc.
(displayed as applicable). The system time and system temperature are also shown
Nav App Version
V4.9.3.87
Displays the software version number for the Navigator Application.
Rec App Version
V4.9.3.87
Displays the software version number for the Receiver application.
Ctrl App Version
V4.9.3.87
Displays the software version number for the Controller application.
Rec Boot Version
V4.9.3.87
Displays the software version number for the Receiver boot loader.
Ctrl Boot Version
V4.9.3.87
Displays the software version number for the Controller boot loader.
Configured Ethernet
UDP 192.168.2.228
(Ethernet system only) Displays the IP address of the Ethernet port.
IP0 192.168.2.228
MAC 050203441526
(Ethernet system only) Displays the MAC address of the Ethernet adapter.
Configured Serial
Serial Port 0: 38400
(Serial system only) Gives the baud rate of the client data serial port.
DP: NMEA0183R (raw)
Serial Port 1: 9600
Displays the DP message format and the baud rate of the DP feed serial port.
Pwr 0.8% Rev 234
Refl 2 Puls 20
Displays the laser power and the number of revolutions completed by the sensor.
Also displays the number of reflections and the number of pulses detected in the last revolution.
T1:Range 5.6m
Bearing 166.7° S 11%
(When tracking a target) Displays the range, bearing and signal strength of the primary target.
Otherwise displays “T1: n/a”.
Sensor Code 1: 7085
Sensor Code 2: 5380
Recent sensor codes for use in troubleshooting.
Sensor
Information
Display
Summary of Contents for CyScan
Page 62: ......
