l
52
Upgrading the Sensor Software Via the Remote Installer
Where possible any upgrades to the sensor software should be done via the Remote
Installer. This utility takes the form of a
CyScan.Installer.Remote.exe
file supplied by
Guidance Marine.
To Upgrade the Sensor Software via the Remote Installer:
1. Ensure that the CyScan Service Interface and Dashboard applications are not running.
2. Locate the file
CyScan.Installer.Remote.exe
on the USB memory stick on which the
CyScan software was supplied.
3. Double-click on the
CyScan.Installer.Remote.exe
file.
4. In the CyScan Installation Configuration window, select the
Connection Type
(“Ethernet” or “Serial”) from the drop-down list.
5. Either enter the sensor’s
IP Address
(for an Ethernet connection)
Or enter the
Serial Port
of your client that is connected to the sensor.
6. Click on the
OK
button. A stream of progress messages is then output, along with any
error messages that may be applicable.
7. After “Installation Complete” is displayed, click on the
OK
button.
Summary of Contents for CyScan
Page 62: ......
