GUIDANCE MARINE CyScan, Installer'S Manual

Page: 23 / 62

l
23
Installing CyScan Client Software onto a Type 2 or 3 Marine Processor
This section explains how to install the CyScan client software onto a Type 2 or 3 Marine
Processor. If this Marine Processor has been supplied by Guidance Marine, it will have
been shipped with the client software already installed. However, it may be necessary to
upgrade the software with a newer version. If so, first uninstall the existing software in the
usual way, following on-screen prompts.
To Install the CyScan Client Software
1. Locate the files CyScanDashboardSetup.exe and CyScanServiceInterfaceSetup.exe
on the USB memory stick on which they were supplied.
2. Double-click on the CyScanDashboardSetup.exe file.
The Welcome screen is displayed.
3. Click on the
Install
button.
4. When prompted, click on the Restart button.
The Welcome screen is displayed.
5. If required, change any of the settings from the default values shown (see below).
6. Click on the
OK button
7. When prompted, click on the Restart button.
The installation process for the Dashboard is complete following the restart.
8. Click on the Close button on the CyScan Dashboard Setup window.
9. Repeat steps 2..8 for CyScanServiceInterfaceSetup.exe.
!
Note: The CyScan
Service Interface should
only be installed onto one
computer in the system. The
Dashboard may be installed
onto multiple computers.
Configuration Settings
When installing the CyScan Dashboard, adjust the following settings or allow to default:
Communications Parameters
For an Ethernet CyScan System, ensure that Ethernet is selected and the sensor’s IP address
is shown alongside.
For a Serial CyScan system, ensure that
Serial
is selected and the COM port of your computer
connected to the sensor is shown alongside.
In order to run the Dashboard with an Emulator
application on the same computer, ensure that
Emulator is selected.
Display
If the Enable Dashboard On-Screen Keyboard box is ticked, the OSK will pop up when you
focus on a text or numerical entry field (typically used on a system without a keyboard).
Logging
The Minimum Free Disk Space (MB) field defines an approximate amount of disk space that
the Dashboard will leave free when writing log files.