l
30
Introduction to Single and Multi-Target Tracking (Continued)
Edit Tracking
Tracking can be altered without first stopping existing tracking. This is done to add
additional reflectors to the current multi-target mode.
To Track Additional Targets
1. Ensure that the dashboard is
In Command
, and that the Quality of the existing track is
at least 90%.
2. Locate a reflection on the BEV, or in the Reflections tab located in the
Tracking
Menu
.
3. Select the additional target reflection symbols (see Selecting Targets for Multi-Target
Tracking on page 33). A number will be superimposed on each as they are clicked.
These additional reflections can be deselected by clicking on them again. Reflections
already used for tracking cannot be deselected.
4. Click on the
Apply
button to confirm and begin tracking.
Notes on Edit Tracking
•
Single Target Tracking cannot be edited.
•
During the Edit process, the existing tracking will continue to work. Any Edits made by
the user can be cancelled by pressing Cancel.
•
We only allow additional targets to be tracked if the Quality of the existing track is
>= 90%. Targets cannot be removed from the existing track. These limitations are to
prevent jumps in the signal being sent to the DP feed. If the users wishes to alter the
set of tracked targets in this manner, they must first Stop Tracking.
Lost Tracking
The CyScan sensor is capable of tracking targets even when they are momentarily
obscured from view, or drift slightly in position. Missing targets will appear as red symbols.
DP Feeds that issue a separate DP telegram for each target will not emit a valid telegram
for missing targets.
If all tracked targets are lost for a period of time, then the CyScan sensor will be unable to
continue tracking. The dashboard will report this with an warning:
Once this state is reached, tracking will have ceased, and no DP feeds will be updated.
The operator will need to Stop Tracking, and select a new set of targets.
Summary of Contents for CyScan AS
Page 62: ......