GUDEL ZP 3-5 V4, Operating Manual

Page: 61 / 354

Set up the upright as follows:
1 Set beam leveling screws to the specified dimensions if necessary
2 Set the front floor leveling screws to the specified mass
3 Position the rear floor leveling screws flush with the upright footing
4 Attach the slings as shown in the illustration
5 Place the squared timber on the floor
6 Set up an upright
7 Set the rear floor leveling screws to the specified dimensions
8 Set up the upright as shown in the layout
9 Attach the spirit level
10 Align the upright horizontally and vertically by means of floor leveling
screws
The upright has been set up and aligned.
Commissioning OPERATING MANUAL ZP 3-5 V4
72057594174110603_v5.0_
EN-US
61