GUDEL FlexxPump4 B, Operating Manual

Page: 69 / 157

6.6.5 INF menu in hour mode
The INF menu provides information on the firmware used and the current set
values in the PRO menu in hour mode. The operator cannot make any
changes to the values in the INF menu. The function indicates the values of
the parameters in unchanged sequence.
The emptying time mode is accepted as the standard at Güdel. Reference is
made to this operating mode in the lubrication recommendation and in the
lubricant quantity calculator. The details on other operating modes are to be
considered as supplementary information.
The function is only available if the FlexxPump is switched "OFF". The control
system reverts to "OFF" mode after a completed function.
A B C D
2 x
InF
OFF
InF b41 h06 c01 400
Fig. 6-6 INF menu in hour mode
A Firmware version of the FlexxPump C Set value for number of strokes
B Set value for pause time in hours D Set value for cartridge volume
Execute the INF menu as follows:
1 Touch the active surface with the magnetic peg
Ü 2
37
2 Remove the magnetic peg from the active surface once the LCD displays
"InF" and the yellow LED lights up
3 Wait until the green LED and the LCD flash twice
The FlexxPump executes the INF menu and displays the set values on the
LCD.
Operation OPERATING MANUAL FlexxPump4 B lubrication system
3421295627_v1.0_
EN-US
69