GUDEL FlexxPump4 B Operating Manual Download Page 42

Page: 42 / 157

5.3.2

Repairing damaged packaging

Repair damaged packaging units as follows:

Remove packaging unit

Check batteries

In case of damaged batteries:

3.1

Contact manufacturer by phone number on the transport informa-
tion

3.2

Follow manufacturer instructions

If batteries are undamaged:

4.1

Repackage batteries

4.2

Attach transport information for lithium battery to packaging unit

The packaging unit is repaired.

5.4

Installing

5.4.1

Prerequisites

Dispose of the packaging in accordance with the local waste regulations.

121

Checking the deliv-

ery

Check the content of the delivery by comparing it with the accompanying
documents. Check the product for damage. Report transport damage
promptly.

Interfaces

Check whether the required interfaces are available and ready for use.
The following interfaces are required:

• Lubricating pinion (lubricating the pinion and rack)
• Lubricating element (lubricating the rail)

Commissioning

OPERATING MANUAL FlexxPump4 B lubrication system

3421295627_v1.0_

EN-US

Summary of Contents for FlexxPump4 B






























































































































































Search results

Summary of Contents for FlexxPump4 B

Reviews:

Related manuals for FlexxPump4 B

Brands by name

Popular brands

GUDEL FlexxPump4 B, Operating Manual

Search results

Summary of Contents for FlexxPump4 B

Reviews:

Related manuals for FlexxPump4 B

Brands by name

Popular brands