GUDEL FlexxPump4 B, Operating Manual

Page: 35 / 157

Display in LCD Explanation
MAX After each dispensing process, the maximum ap-
plied counter-pressure is displayed in bar during
the dispensing process.
1 / 2 During a dispensing process, the FlexxPump indi-
cates from which hydraulic output the lubricant is
transported.
Tab. 4-3 Explanation of additional characters
Sub-menu
INF menu
Sub-menu Display in LCD Explanation
InF b41 Firmware version of the FlexxPump
InF h06 Current set value for pause time "h"
InF c01 Current set value for number of
strokes "c"
InF 06 Current set value for emptying time
Tab. 4-4 Explanation INF menu
SET menu
Sub-menu Display in LCD Explanation
SEt -h- Operating mode: hour mode
SEt Et Operating mode: emptying time mode
SEt 400 Cartridge volume
Tab. 4-5 Explanation of SET menu
RUN menu
Sub-menu Display in LCD Explanation
run 01…70 During the manually triggered ac-
tive RUN command (special dis-
pensing), the approximate counter-
pressure is displayed in bar in the
LCD.
Tab. 4-6 Explanation of RUN menu
Design, function OPERATING MANUAL FlexxPump4 B lubrication system
3421295627_v1.0_
EN-US
35