GUDEL FlexxPump4 B, Operating Manual

Page: 68 / 157

6.6.4 INF menu in emptying time mode
The INF menu provides information on the firmware used and the current set
values in the PRO menu in emptying time mode. The operator cannot make
any changes to the values in the INF menu. The function indicates the values
of the parameters in unchanged sequence.
The function is only available if the FlexxPump is switched "OFF". The control
system reverts to "OFF" mode after a completed function.
2 x
InF
OFF
InF b41 06 c01 400
A B C D
Fig. 6-5 INF menu in emptying time mode
A Firmware version of the FlexxPump C Set value for number of strokes
B Set value for emptying time in months D Set value for cartridge volume
Execute the INF menu as follows:
1 Touch the active surface with the magnetic peg
Ü 2
37
2 Remove the magnetic peg from the active surface once the LCD displays
"InF" and the yellow LED lights up
3 Wait until the green LED and the LCD flash twice
The FlexxPump executes the INF menu and displays the set values on the
LCD.
Operation OPERATING MANUAL FlexxPump4 B lubrication system
3421295627_v1.0_
EN-US
68