GUDEL FlexxPump4 B Operating Manual Download Page 40

Page: 40 / 157

WARNING

Leaking batteries

Battery fluids and their fumes are corrosive and poisonous! They can cause
injuries and environmental damage!

• Make sure there is good ventilation in closed rooms before repairing leaks

• Wear safety goggles and gloves

• Prevent battery fluids from getting into the drinking water supply

• Use only dry cleaning cloths without detergents

• Dispose of batteries in an environmentally friendly manner

NOTE

Improper transport

Improper handling of the crates can lead to transport damage!

• Do not tip over the crates

• Avoid heavy vibrations and shocks

• Observe the symbols on the packaging

5.1.2

Personnel qualifications

Only appropriately trained and authorized technicians are allowed to commis-
sion the product.

5.2

Intermediate storage

Observe the storage conditions if the product needs to be stored for a cer-
tain amount of time before assembly.

113

Commissioning

OPERATING MANUAL FlexxPump4 B lubrication system

3421295627_v1.0_

EN-US

Summary of Contents for FlexxPump4 B






























































































































































Search results

Summary of Contents for FlexxPump4 B

Reviews:

Related manuals for FlexxPump4 B

Brands by name

Popular brands

GUDEL FlexxPump4 B, Operating Manual

Search results

Summary of Contents for FlexxPump4 B

Reviews:

Related manuals for FlexxPump4 B

Brands by name

Popular brands