Gude Expert Power Control NET 4x DIN, Manual

Page: 18 / 34

18
Expert Power Control NET 4x DIN
4.3.7 Configuration - SNMP Trap Receiver List
Configuration - SNMP Trap Receiver List
4.3.7.1 Enable Traps
Here you can activate SNMP-traps. if enabled, Expert Power
Control NET will dispatch SNMP-traps to all receivers listed.
Receivers have to be listed as follows: IP address (and, if
necessary the HTTP port), e.g.: 192.168.0.2:8000
Use SNMP only if your network is fitted for.
4.3.7.2 Trap Version
Here you can choose between SNMP-traps standard 1 and 2c.
Use SNMP only if your network is fitted for.