Gude Expert Power Control NET 4x DIN, Manual

Page: 4 / 34

4
Expert Power Control NET 4x DIN
1 Security Advise
The device must be installed only by qualified personnel according
to the following installation and operating instructions.
The manufacturer does not accept responsibility in case of improper
use of the device and particularly any use of equipment that may
cause personal injury or material damage.
The device contains no user-maintenable parts. All maintenance
has to be performed by factorytrained service personnel.
Check if the power cord, the plug and the socket are in proper
condition.
The device can be connected only to 230V AC (50 or 60 Hz) or
12/24V DC power supply sockets.
Always connect the device to properly grounded power sockets.
The device is intended for indoor use only. Do NOT install them in
an area where excessive moisture or heat is present.
Because of safety and approval issues it is not allowed to modify
the device without our permission.
Please note the safety advises and manuals of connected devices,
too.
The device is NOT a toy. It has to be used or stored out or range of
children.
Packaging material is NOT a toy. Plastics has to be stored out of
range of children. Please recycle the packaging materials.
In case of further questions, about installation, operation or usage of
the device, which are not clear after reading the manual, please do
not hesitate to ask our support team.