Gude Expert Power Control NET 4x DIN, Manual

Page: 13 / 34

13
Configuration
All changes need a restart of the firmware to get valid.
4.3.3.4 Gateway
Here you can change the standard gateway of Expert Power
Control NET .
All changes need a restart of the firmware to get valid.
4.3.3.5 Use DHCP
Here you can set, if Expert Power Control NET shall get its TCP/
IP settings directly from your DHCP server. If DHCP is activated,
Expert Power Control NET proves if a DHCP server is active
inside of your LAN. Then Expert Power Control NET requests
TCP/IP settings from this server. If there is no DHCP server inside
of your network, we recommend to deactivate this function.
All changes need a restart of the firmware to get valid.