23
Configuration
5
Operation
Enter topic text here.
5.1
Switching at the device
Expert Power Control NET 4x
DIN
disposes of two buttons:
“select”
and
“ok”
. By pushing
“select”
, the LED of Power Port 1
starts blinking which means that it is selected. By pushing the
button again, the next Power Port is selected. If you want to
change the switching state of the selected Power Port, push the
“ok”
button for two seconds.
You can check the status of the Power Ports by the color of the
Power Port status LED (green=enabled/red=disabled).
5.2
Switching by Webinterface
Go to the website of
Expert Power Control NET
. Enter the IP
address of
Expert Power Control NET
into the address line of
your internet browser:
http://”IP address of
Expert Power Control NET
”/
and press
LOGIN
Summary of Contents for Expert Power Control NET 4x DIN
