GÜDE 58451, Translation Of The Original Instructions

Page: 21 / 80

17
ENGLISH
Technical Data
Cordless Angle Grinder WS 18-0 BL
Art. No 58451
Battery voltage 18 V
No-load speed 10000 min
-1
Grinding disc diameter max. 125 mm
Grinding disc thickness max. 6 mm
Cutting disk thickness min. / max. 1 / 1,6 mm
hole diameter 22, 23 mm
Thread of work spindle M14
Weight without battery/Charging
equipment
1,7 kg
Noise details
Measured according to EN 60745; Uncertainty K = 3
dB (A),
Wear ear protectors!
Grind:
Sound pressure level L
pA
83,4 dB(A)
Sound power level L
WA
94,3 dB(A)
Separate:
Sound pressure level L
pA
82,9 dB(A)
Sound power level L
WA
93,9 dB(A)
Vibration details
Vibration total values (triaxial vector sum) determined
according to EN 60745:
Surface grinding:
Vibration emission value a
2,565 m/s²
Separate:
Vibration emission value a
2,978 m/s²
Uncertainty K = 1,5 m/s 2
For other applications, e.g. Abrasive Cutting-Off
Operations or Wire Brushing other vibration values
could occur.
WARNING
The declared vibration emission level represents the
main applications of the tool. However if the tool is used
for different applications, with different accessories or
poorly maintained, the vibration emission may differ.
This may significantly increase the exposure level over
the total working period.
The vibration emission level will vary because of the
ways in which a power tool can be used and may increa-
se above the level given in this information sheet.
The vibration emission level may be used to compare
one tool with another.
It may be used for a preliminary assessment of exposure.
An estimation of the level of exposure to vibration
should also take into account the times when the tool is
switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the ope-
rator from the effects of vibration such as: maintain the
tool and the accessories, keep the hands warm, organi-
sation of work patterns.
Read and understand the operating
instructions before using the
appliance.
Familiarise with the control
elements and how to use the appliance
properly. Abide by all the safety measures stated in the
service manual. Act responsibly toward third parties. The
operator is responsible for accidents or risks to third
parties.
Persons over 18 years of age can only work on the appli-
ance. An exception includes youngsters trained in order
to reach knowledge under supervision of the trainer
during occupational education.
In case of any doubts about connection and operation
refer please to our customer center
General Power Tool Safety Warnings
WARNING
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool“ in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
1) Work area safety
a)
Keep work area clean and well lit.
Cluttered or dark
areas invite accidents.
b)
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools create
sparks which may ignite the dust or fumes.
c)
Keep children and bystanders away while
operating a power tool.
Distractions can cause you to
lose control.
2) Electrical safety
a)
Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase
the risk of electric shock.
3) Personal safety
a)
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication.
A
moment of inattention while operating power tools may
result in serious personal injury.
b)
Use personal protective equipment. Always wear
eye protection.
Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
c)
Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool.
Carrying power tools with your finger on the
EN