KVM over IP
IP auto configuration
With this option you can control if the IP-KVM should fetch its network settings from a
DHCP or BOOTP server. For DHCP, select “dhcp” , and for BOOTP select “bootp”
accordingly. If you choose “none” then IP auto configuration is disabled.
Preferred host name
Preferred host name to request from DHCP server. Whether the DHCP server takes the
IP-KVM suggestion into account or not depends on the server configuration.
IP address
IP address in the usual dot notation.
Subnet Mask
The net mask of the local network.
Gateway IP address
In case the IP-KVM should be accessible from networks other than the local one, this IP
address must be set to the local network router's IP address.
Primary DNS Server IP Address
IP address of the primary Domain Name Server in dot notation. This option may be left
empty, however the IP-KVM will not be able to perform name resolution.
Secondary DNS Server IP Address
IP address of the secondary Domain Name Server in dot notation. It will be used in case
the Primary DNS Server cannot be contacted.
Remote Console And HTTPS port
Port number at which the IP-KVM's Remote Console server and HTTPS server are
listening. If left empty the default value will be used.
HTTP port
Port number at which the IP-KVM's HTTP server is listening. If left empty the default
value will be used.
Telnet port
Port number at which the IP-KVM's Telnet server is listening. If left empty the default
value will be used.
SSH port
Port number at which the IP-KVM SSH (Secure SHell) server is listening to. If left empty the
default value (port 22) will be used.
88 / 132
Summary of Contents for IPK-101
