KVM over IP
serial port and use the Telnet Console, or a standard Telnet client to connect to the
IP-KVM.
The serial port Log function is used for console server application. The data receiving from the
tracking serial port can be buffered in the IP-KVM memory or to a NFS server. The user can
also define keywords for the serial port that can trigger an email notification or SNMP trap to
an administrator if the keyword is found in the logged data. This will enable the administrator
to monitor the data from the attached device.
The reaction of detecting a keyword can be configured in section “Event Log”
5.5.6
Date / Time
Figure 5-27 Date / Time
This link refers to a page, where the internal real-time clock of the IP-KVM can be set up. You
have the possibility to adjust the clock manually, or to use a NTP timeserver. Without a
timeserver, your time setting will not be persistent, so you have to adjust it again, after
IP-KVM loses power for more than a few minutes. To avoid this, you can use a NTP
timeserver, which sets up the internal clock automatically to the current UTC time. Because
NTP server time is always UTC, there is a setting that allows you to set up a static offset to get
your local time.
Warning
There is currently no way to adjust the daylight saving time automatically. So you
have to set up the UTC offset twice a year properly to the local rules of your country.
100 / 132
Summary of Contents for IPK-101
