KVM over IP
5.2.5
Creating an Image
5.2.5.1 Creating a Floppy Image
MS Windows
You can use the tool “Raw Write for Windows”. You can get the RawWrite software from the
website
http://www.chrysocome.net/rawwrite
.
Figure 5-10 RawWrite for Windows selection dialog
From the menu, select the tab “Read”. Enter (or choose) the name of the file in which you
would like to save the floppy content. Click on the button “Copy” to initiate the image creation
process.
UNIX and UNIX-like OS
To create an image file, make use of “dd”. This is one of the original UNIX utilities and is
included in every UNIX-like OS (UNIX, Sun Solaris, and Linux).
To create a floppy image file, copy the contents of a floppy to a file. You can use the following
command:
dd
[
if=/dev/fd0
] [
of=/tmp/floppy.image
]
dd reads the entire disc from the device /dev/fd0, and saves the output in the specified output
file /tmp/floppy.image. Adjust both parameters exactly to your needs (input device etc.)
70 / 132
Summary of Contents for IPK-101
