KVM over IP
5.6.4
Unit Reset
This section allows you to reset specific parts of the device. This involves resetting keyboard/mouse,
USB, video engine, or the IP-KVM device itself.
In general, the IP-KVM requires a reset when implementing a firmware update. In the event of an
abnormal operation, a number of subsystems may be reset without resetting the entire IP-KVM.
Click
Maintenance > Unit Reset
, the following window displays.
Figure 5-33 Unit Reset
To reset a certain IP-KVM functionality click on the
Reset
button as displayed in figure below.
Clicking on
Reset
of
Reset Device
will reboot the IP-KVM system.
It will close all current
connections to the administration console and to the Remote Console. The whole process will take about one
minute. Resetting subdevices (e.g. video engine) will take few seconds only and does not result in closing
connections.
Note
: Only the
super
user is allowed to reset the IP-KVM.
113 / 132
Summary of Contents for IPK-101
