QX User Manual – Issue B
- 11
-
Cancelling Setting
The setting procedure can be cancelled at any time during the exit time by pressing
✗
on the keypad
that was used to start setting, logging on to any other keypad or turning a keyswitch to the unset
position.
Keyswitch Setting
As an alternative to setting and unsetting from a keypad, your system may be fitted with an optional
keyswitch, which permits setting and unsetting of a group by operating a keyswitch. The keyswitch
may be configured for any set mode.
Automatic Setting
The system may have been programmed by the installation engineer to automatically set all or parts
of the system according to a pre-programmed schedule. The schedule will have been programmed to
take into account the normal closing time, non-working days and holidays. The schedule may be
configured for any set mode.
Setting with Warnings
The system will automatically display any conditions that the user should be aware of before setting
the system. These conditions are described as set warnings and do not prohibit the user from setting
the system in the normal way.
Workshop
Seconds Left-005
1=Workshop
2=Office
1
Loading Door
Isolated
✔
=Set
✓
✕
The set warnings include:
1. Bypassed circuit(s)
2. Circuit(s) on soak test has failed (a special circuit test mode set up
by the installation engineer)
3. Isolated circuit(s)
4. Line Fault (only when setting with telephone line fault is allowed)
5. Shunted circuit(s)
Intelligent Security & Fire Ltd
