QX User Manual – Issue B
- 15
-
Reset
Code-03
The resetting method programmed by the alarm company engineer for each area and the system will
depend on the particular security requirements of the area or system. There are 3 types of reset:
1. Customer reset, where the customer can reset any alarm
2. Engineer reset, where the alarm company engineer must reset all alarms
3. Managed reset, where the customer can reset an alarm after reporting the event to the alarm
company
Workshop
Unset
Alarm
PIR in Office
✔
=Reset
02=Set
04=Test
01313333802
Code:123456
✕
If your system is programmed for engineer reset a
telephone number and code will be displayed. Call this
number and quote your code. if your system is
configured for managed reset you will be given a code
to reset your system. This code can only be used
once.
If an engineer reset is required, it will not be possible
to set the system.
✓
Alarm cannot be reset
Managed Reset
If the system is programmed for managed reset and an engineer reset is required contact the alarm
installation company. You will be issued with a special 6-digit PIN code. This PIN code can be used
only once to reset the system. Enter the PIN to clear the engineer reset condition.
12:00 Mon 27 Sep
Guardall
12:00 Mon 27 Sep
Enter- *****
✓
Reset OK
reset code +
Intelligent Security & Fire Ltd
