23
2. S
ET
THE
TRANSMITTER
DIP S
WITCHES
There are nine (9) transmitter DIP switches; each of which can be placed in three
different positions (+, 0, –). DO NOT set all the switches in the same position,
such as all +, all 0, or all –. Once the DIP switches have been set to a personal
code, replace and close the access cover.
WARNING: No other adjustments should be made inside the transmitter.
3. “T
EACH
”
THE
N
EW
C
ODE
TO
C
ONTROL
B
OARD
M
EMORY
A.
Turn control box power switch OFF.
B.
Unscrew and remove the control box cover.
C.
Press and hold the LEARN button on the control board, and
turn the power switch ON. Release LEARN button. Wait 15
seconds for the receiver to charge.
D.
Press and hold transmitter button until the red STATUS LED
comes ON.
E.
Release transmitter button. The new code is stored in control
board memory.
M
OUNTING
THE
R
ECEIVER
Use the transmitter to check the range of the receiver before permanently
mounting it.
Consider the following when mounting the receiver:
• Receiver cable length is 20 feet (receivers with a longer cable are available
as special order items; Call the GTO Sales Department). NEVER splice
receiver cable!
• Run the cable through PVC conduit to protect it from damage.
• DO NOT run cable through metal conduit because the receiver signal range
will be decreased.
• DO NOT run cable in a conduit containing AC wiring.
• DO NOT mount receiver on a metal fence or post; doing so will decrease
signal range.
• DO NOT overtighten the mounting screws; the receiver housing could be
warped and the weather seal damaged.
• The receiver range can vary from 50 to 100 feet depending upon weather,
topography, and external interference.
FCC Regulation
This device complies with FCC rules Part 15. Operation is subject to the following conditions:
1. This device may not cause harmful interference.
2. This device must accept an interference that may cause undesired operation.
Transmitter distance may vary due to circumstances beyond our control. NOTE: The manufacturer is not
responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
Such modifications could void the user’s authority to operate the equipment.
1234
ON
RCVR
SEQ1
SEQ2
LEARN
STATUS
R B G
AUTOCLOSE
INERTIA
OBSTRUCT
SENS.
PULL/PUSH
SNGL/DUAL
MIN
MAX
MIN
OFF
120
60
MAX
STATUS LED
