GTCO
Making Selections
You can use either a stylus or a cursor to trace
and measure drawings. You can also use either
device to make selections from the QuikRuler
menu. This manual assumes you have a stylus.
Stylus
16-Button Cursor
4-Button Cursor
Crosshairs for tracing
or selecting
Crosshairs for tracing
or selecting
Press any button on the bottom
three rows to activate a menu function
without pointing to the menu.
(see "Transducer Button Functions")
Press the white, green or blue button on
the cursor to activate a menu function
without pointing to the menu.
(see "Transducer Button Functions")
6
Press any button on the top
row to make a selection.
(same as stylus tip switch)
Press the yellow button
on the cursor to make a selection.
(same as stylus tip switch)
Setting Up
To make a selection
with the stylus,
press the tip down.
Press the side button to
use the Count function.
For more information, see
"Counting Elements of
Your Drawing" later in this
manual.
53-00039 C.p65
10/4/00, 11:54 AM
8
