GTCO
20
To set the scale automatically:
• Select
• Follow the prompts that QuikRuler displays to
select the starting and ending scale points.
For example, suppose you are using the
illustration of the map legend shown below.
You could select the point just below the
0
as
the starting point and the point just below the
4
as the ending point.
• QuikRuler prompts you for
Distance (
units
)
.
• Use the number buttons on the QuikRuler
menu to tell QuikRuler the distance between
the two points you selected.
Referring to the map legend above, you would
select
to tell QuikRuler that the distance
between the two points is 4 kilometers.
To set the scale automatically
from the legend...
1
Select the
starting point
2
Select the
ending point
Scale/Units
53-00039 C.p65
10/4/00, 11:55 AM
22
